News: What height should my welding table be?

The ideal height for a welding table in Australia typically ranges from 76 to 91 cm. The exact height depends on the type of welding you'll be doing, whether you sit or stand, and on your height and that of your employees.

At Leussink, when we sell a Demmeler 3D table system, we ask many questions before we make a recommendation. Here are some general guidelines for the best welding table height for you:

• Comfortable Working Position: The table should allow you to work comfortably without bending over too much. When standing, your elbows should be at a 90-degree angle or slightly below when your hands are on the work surface.
• Type of Work: If you do fine, detailed work, you might prefer a taller table. For larger, heavier workpieces, a lower table might be better.
• Adjustability: Consider an adjustable welding table or adding risers/blocks under the legs to customise the height as needed.

The great part about a modular system like the Demmeler welding table system is that you can change the legs to suit your requirements. With a fixed welding bench, you are locked in, but a modular welding table allows you to change if needed.

Comfortable working position

A comfortable working position is crucial for both efficiency and safety in welding, so the height of your welding table is critical.

A key consideration is a natural elbow bend. When you stand next to your welding bench, your elbows should be at a 90-degree angle or slightly lower when your hands are resting. This position minimises strain on your shoulders and back, reducing fatigue during long work periods. Plus, your hands should be able to move freely across the table without needing to reach up or down too much. This control is essential for maintaining precision in your welds.

The table height should also allow you to keep your back relatively straight. Bending over too much can lead to back pain and long-term injuries. A slight forward lean is natural, but excessive bending should be avoided.

Your feet should be flat on the ground, providing a stable base. If you have to lean too far forward, it might mean your table is too low, leading to poor posture and discomfort over time. Your line of sight should be naturally directed toward the workpiece without tilting your head excessively. If you’re constantly looking down or straining your neck, it could mean the table is either too high or too low.

By ensuring your welding table is set at a height that promotes a comfortable working position, you can work more efficiently, with less fatigue and a lower risk of injury.

Adjustable height welding table

Adjustable legs on a welding table offer significant flexibility and comfort by allowing you to customise the table height for different tasks and users. They’re beneficial in shared workspaces or when working on diverse projects that require varying table heights.

Adjusting the table height allows you to set it at a level that minimises strain on your back, neck, and shoulders, leading to a more comfortable and less fatiguing work experience. Different welding tasks require different table heights for optimal precision and control, which adjustable legs can accommodate.

With the ability to adjust the height, you can create a more efficient workflow by setting the table at the perfect height for your tools and materials. Quickly change the table height rather than using makeshift solutions or multiple tables, saving time and increasing productivity.

Adjustable legs enhance your welding setup's flexibility, comfort, and efficiency, making them a valuable addition to any workspace.

Demmeler 3D welding table legs

Within the Demmeler welding table accessories range, several table leg styles cater to different purposes. These table legs are robust, well-designed, and easily attached to the Demmeler 3D table. They feature a foot sleeve that helps prevent pinching of the welding hose and protects the threaded spindle against dirt.

Demmeler's range of table legs ensures that you have the right support for your welding and fixturing needs, whether you require standard legs for stability, telescopic legs for adjustable height, heavy-duty wheels, or scissor lift legs.

Demmeler table from Leussink

At Leussink, we sell more than just a welding fixture table. We work with our clients to ensure the Demmeler welding solutions work for them by providing onsite visits and follow-ups. We consider everything that makes a welding workshop successful, including welding table height.

Through our knowledge and decades of experience, Leussink can create welding and fixturing solutions for the Australian market that stand the test of time. We work with clients to capitalise on efficiencies and productivity without compromising quality and accuracy.